This pack contains all parts required to build one BlinkStick Pro. The kit comes with a preprogrammed ATTiny85 chip with the latest BlinkStick Pro firmware.
Once the kit is assembled, the board can be connected to Adafruit NeoPixels, basic RGB LED or hacked into LED strips like IKEA DIODER and controlled with the computer.
Bag of parts contains:
- PCB board with gold plated pads
- USB plug
- 10 uF electrolytic capacitor
- 0.1 uF tantalum capacitor
- 2 x 68 Ohm resistors
- 2.2 kOhm resistor
- 2 x 3V6 zener diodes
- ATTiny85 with BlinkStick firmware v2.0
- DIP8 socket
Detailed build instructions available at http://www.blinkstick.com/help/build
In order to solder the kit you will need:
- Soldering iron
- Some solder
Dimensions:
- Board only is 16 x 35 x 1.5 mm without components
- Assembled size is 16 x 50 x 11 mm
